Ricoh AP610N Guia De Rede

Monitoring and Configuring the Printer

84

❒ Remote Maintenance should be

password-protected so that access
is allowed to administrators only. 

❒ The password is the same as the

one of Web Image Monitor admin-
istrator. When the password is
changed using "mshell", other
passwords change also.

❒ Some command cannot be set de-

pending on the model type.

Follow the procedure below to use
telnet.

❒ Only one user at a time can log on

to perform remote maintenance.

AAAA

BBBB

Enter your user name and pass-
word. 
To use default account, enter “ad-
min” as user name, and leave the
password blank.

❒ For user authentication, enter a

login user name and password,
and then click [OK].

❒ For user code authentication,

enter a user code in [User Name],
and then click [OK].

CCCC

DDDD

The configuration message about
saving the changes appears.

EEEE

{{{{# Enter}}}} key.

If you do not want to save the chang-
es, enter "no", and then press the 

{{{{#

}}}} key. To make further changes,

enter "return" at the command line,
and then press the 

{{{{# Enter}}}} key.

❒ If the message "Can not write

NVRAM information" appears,
the changes are not saved. Re-
peat the procedure above.

❒ When the changes are saved, the

network interface board is reset
automatically with that changes.

❒ When the network interface

board resets, the print job in
print process will be printed.
However, print jobs in queue
will be canceled.

Use the “access” command to view
and configure access control. You can
also specify two or more access ranges.

❖

❖

❖

❖ View settings

❖

❖

❖

❖ Configuration

✩ range “start-

•

✩ represents a target number
between 1 and 5. (Up to five ac-
cess ranges can be registered
and selected.)

Example: to specify accessible IP
addresses between 192.168.0.10
and 192.168.0.20: