Ricoh is01 Guia Do Utilizador
SCANNER SPECIFICATIONS
5-3
,17(5)$&(6
This section provides information on the shielded high density 50-pin SCSI II
cable you use to connect your scanner to your host computer, on the SCSI II
Terminator plug you use on your machine, and on the RS-232C interface.
cable you use to connect your scanner to your host computer, on the SCSI II
Terminator plug you use on your machine, and on the RS-232C interface.
It is your responsibility to make sure that you have a SCSI II port available on
the host computer and to provide the SCSI II cable. In addition, you must
connect a SCSI II terminator plug to the top SCSI II port on the machine. The
SCSI II cable is not provided with the machine.
the host computer and to provide the SCSI II cable. In addition, you must
connect a SCSI II terminator plug to the top SCSI II port on the machine. The
SCSI II cable is not provided with the machine.
☛
Refer to the “Setting up the Scanner” chapter in this manual for information on
how to connect the scanner to your host computer.