Ricoh is760 Guia De Utilização
Setting up the Scanner
20
2
GGGG
Connect the IEEE1394 interface board to the extension connector. Fix the
board with four accessory screws from inside, two accessory screws from
outside.
board with four accessory screws from inside, two accessory screws from
outside.
HHHH
Check that it is connected tightly, check that there are no foreign objects
such as metal on the scanner control unit.
such as metal on the scanner control unit.
IIII
Close the scanner control unit cover and fix with seven screws, then insert
the scanner control unit into the main unit.
the scanner control unit into the main unit.
Note
❒ Be sure to place the scanner on the level surface when inserting the scanner
control unit.
❒ Insert the scanner control unit till you see the screw holes.
JJJJ
Fix the scanner control unit with three screws.
KKKK
Removed cables must connect in former state.
ADC014S