Ricoh CL5000 Guia De Utilização
4
R CAUTION:
• Do not eat or swallow toner.
• Keep toner (used or unused) and toner cartridges out of reach of children.
• Protect the equipment from dampness or wet weather, such as rain, snow,
and so on.
• Unplug the power cord from the wall outlet before you move the equipment.
While moving the equipment, you should take care that the power cord will
not be damaged under the equipment.
not be damaged under the equipment.
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
• Do not allow paper clips, staples, or other small metallic objects to fall inside
the equipment.
• For environmental reasons, do not dispose of the equipment or expended
supply waste at household waste collection points. Disposal can take place
at an authorized dealer or at appropriate collection sites.
at an authorized dealer or at appropriate collection sites.
• The inside of the machine becomes very hot. Do not touch the parts with a
label indicating "
v" (means hot surface). Touching "v" (means hot surface)
could result in a burn.
• The inside of the machine becomes very hot. Do not touch the inner surface
with "
n" and "v" labels indicating a hot surface. Touching that surface
could result in a burn.
• Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you only use the expendable supplies avail-
able at an authorized dealer.
able at an authorized dealer.
• The fusing unit becomes very hot. When installing the new fusing unit, turn
off the printer and wait about 30 minutes. After that, install the new fusing
unit. Not waiting for the unit to cool down can result in a burn.
unit. Not waiting for the unit to cool down can result in a burn.
• Do not pull out the fusing unit forcefully. It may cause the unit to fall and re-
sult in an injury.
• When touching the fusing unit, do not touch any areas other than the handle
as it may cause a burn.
• Do not incinerate the oil bottle. This could cause a fire or an injury.
• Spilt oil is very slippery. If oil is spilt, wipe it up with an alkaline cleaner. Oth-
erwise, the oily surface can create the danger of slipping and an injury.
• Do not open the front cover when the paper tray is pulled out halfway. If you
do, it might cause an injury.
• Do not put an object on the left cover when it is open.
• When replacing the photoconductor unit, hold the handles in beige and
green, and then lift it slowly. Lifting it in an inappropriate manner or handling
it carelessly may cause the unit to drop and result in an injury.
it carelessly may cause the unit to drop and result in an injury.