Ricoh AP610N Guia De Rede

Using a Printer Server

VVVV

Start the print server by entering
the following from the console of
the NetWare server.
If the print server is in operation,
quit and restart it.

❖

❖ To quit

CAREE: unload pserver

❖

❖ To start

C A R E E : l o a d p s e r v e r
print_server_name

Note

❒ If the printer works as config-

ured, the message "Waiting for
job" appears.

Setting Up as a Remote Printer
(NetWare 4.x, 5/5.1, 6/6.5)

Follow the procedure below to use
the printer as a remote printer under
NetWare 4.x, 5/5.1 and 6/6.5.

Important

❒ To use the printer as a remote print-

er under NetWare 4.x, 5/5.1, 6/6.5,
set it to NDS mode.

❒ Do not use the printer as a remote

printer when Pure IP is used.

Setting up using NIB Setup Tool

AAAA

Log on to the file server as an ad-
m inistrator or adm inistrator
equivalent.

BBBB

Start NIB Setup Tool from [Start]
menu.

CCCC

Click [Property Sheet], and then
click [OK].

DDDD

Select a printer you want to con-
figure.

EEEE

Click [NetWare].

FFFF

In the [Logon Mode] area, click [File
Server Mode]

or [NDS mode].

If [File Server Mode] is selected, the
network connection is established
based on the string you entered.
If [NDS mode] is selected, the net-
work connection is established
based on the string you entered.

GGGG

In the [Print Server Name(P):] box,
enter the name of the print server.
Use the same print server name in
NWadmin. Enter up to 47 alpha-
numeric characters.