Ricoh AP610N Guia De Rede

Remote Maintenance by telnet

domainname

Use the "domainname" command to
display or configure the domain
name settings.
You can configure the Ethernet inter-
face, IEEE 1394 interface, or IEEE
802.11b interface.

❖

❖ View settings

The following command displays
the current domain name:

msh> domainname

❖

❖ Interface domain configuration

msh> domainname “interface_
name”

❖

❖ Setting the Domain Name

msh> domainname “interface_
name” name “domain name”

• A domain name can be entered

using up to 63 alphanumeric
characters.

• The Ethernet interface and IEEE

802.11b interface will have the
same domain name.

• ip1394 can be specified only

when the IEEE 1394 interface is
installed.

• wlan can be specified only when

the IEEE 802.11b interface is in-
stalled.

❖

❖ Deleting the Domain Name

msh> domainname “interface_
name” clear name

help

Use the "help" command to display the
available command list and the proce-
dures for using those commands.

❖

❖ Command list display

msh> help

❖

❖ Display of procedure for using com-

mands

msh> help “command_name”

hostname

Use the “hostname” command to
change the printer name.

❖

❖ View settings

msh> hostname

❖

❖ Configuration

msh> hostname “interface_
name ” “printer_name”

• Enter the printer name using up

to 63 alphanumeric characters.

• You cannot use a printer name

starting with "RNP" or "rnp".

• The Ethernet interface and IEEE

802.11b interface will have the
same printer name.

• ip1394 can be specified only

when the IEEE 1394 interface is
installed.

• wlan can be specified only

when the IEEE 802.11b interface
is installed.

❖

❖ Initializing the printer name for each

interface

msh> hostname “interface_
name” clear name

Interface

Interface set

ether

Ethernet interface

ip1394

IEEE 1394 interface

wlan

IEEE 802.11b interface

Interface name

Interface configured