Ricoh ap1400 Manual Do Utilizador
Troubleshooting
118
10
Type 2 printer
R
CAUTION:
Note
❒ Please refer to the inside of the
front cover of this manual to con-
firm which printer (Type 1 Printer
or Type 2 Printer) you have.
firm which printer (Type 1 Printer
or Type 2 Printer) you have.
A
Pull the paper tray out of the
printer.
printer.
B
Place the tray on a flat surface. Re-
move paper from the paper tray.
move paper from the paper tray.
C
Clean the friction pad (gray or
brown part) with a soft damp
cloth. After wiping it with a damp
cloth, wipe it with a dry cloth to
remove the water.
brown part) with a soft damp
cloth. After wiping it with a damp
cloth, wipe it with a dry cloth to
remove the water.
Important
❒ Do not use chemical cleaner or
organic solvent such as thinner
or benzene.
or benzene.
D
Load paper with the print side up
into the paper tray. Insert the pa-
per tray into the printer until it
stops.
into the paper tray. Insert the pa-
per tray into the printer until it
stops.
Note
❒ If misfeeds or multi-feeds of pa-
per occur after cleaning the fric-
tion pad, contact your sales or
service representative.
tion pad, contact your sales or
service representative.
❒ Follow the same procedure to
clean the friction pad of the op-
tional tray and the envelope
feeder.
tional tray and the envelope
feeder.
Cleaning the Paper Feed
Roller
Roller
If the paper feed roller becomes dirty,
misfeeds might occur. In this case,
clean the roller as follows:
misfeeds might occur. In this case,
clean the roller as follows:
•
The paper tray does not have a
stopper. When pulling it out, be
careful not to pull it strongly. If
you do, the tray might fall and
cause personal injury.
stopper. When pulling it out, be
careful not to pull it strongly. If
you do, the tray might fall and
cause personal injury.
TS4Y270E
TS4Y280E
TS4Y100E