Ricoh CL3000 Manual Do Utilizador

1394 Interface Unit Type 4510

1394 Interface Unit Type 4510

R CAUTION:

Important

❒ Printing using "1394/Scsi Printer"

(Windows 2000) device and "IEEE
1394 and SCSI printers" (Windows
XP) with the optional 1394 Inter-
face Unit is possible under Win-
do ws 2000 and Windows XP.
Printing with IP over 1394 is possi-
ble under Windows Me and Win-
dows XP.

❒ Under Windows 2000, the 1394 In-

terface Unit can only be used with
Service Pack 1 or later. If the Serv-
ice Pack is not installed, the con-
nectable SCSI print device in a
1394 bus is only one. The client
cannot install the printer driver
without using an account with Ad-
ministrators permission.

❒ Before touching the 1394 Interface

Unit, touch something metal to
discharge any static electricity.
Static electricity can damage the
1394 Interface Unit

❒ Unplug all the interface cables

from the printer before installa-
tion. If you take out the controller
board with cables plugged in, the
1394 Interface Unit might be dam-
aged.

❒ Do not plug or unplug the 1394 in-

terface cable while installing the
printer driver

❒ Use the 1394 Interface cable that

comes with 1394 Interface Unit.

AAAA

Check the contents of the package
for the following:

❖

❖ 1394 Interface Unit Type 4510

❖

❖ Interface Cable (6 pins ×××× 6 pins)

❖

❖ Interface Cable (6 pins ×××× 4 pins)

BBBB

Turn off the power, and then un-
plug the power cable and the in-
terface cable.

• Do not touch the inside of the

controller board compartment. It
may cause a machine malfunc-
tion or a burn.

ZHBP400E

AresPGBOptionSetup-F_FM.book Page 19 Monday, July 29, 2002 1:12 PM