Ricoh CL3000 Manual Do Utilizador
802.11b Interface Unit Type A
25
1
802.11b Interface Unit Type A
R CAUTION:
Important
❒ Before touching the 802.11b Inter-
face Unit, touch something metal
to discharge any static electricity.
Static electricity can damage the
802.11b Interface Unit
to discharge any static electricity.
Static electricity can damage the
802.11b Interface Unit
❒ Do not subject the 802.11b Inter-
face Unit to physical shocks.
AAAA
Check the contents of the package
for the following:
for the following:
❖
❖
❖
❖ 802.11b Interface Unit Type A
• Interface Unit
• Card
• Antenna
BBBB
Turn off the power, and then un-
plug the power cable.
plug the power cable.
CCCC
Remove the two screws that fas-
ten the controller board on the
back of the printer.
ten the controller board on the
back of the printer.
The removed screws will be used
in step
in step
K
to fasten the controller
board.
• Do not touch the inside of the
controller board compartment. It
may cause a machine malfunc-
tion or a burn.
may cause a machine malfunc-
tion or a burn.
ZHBP410E
ZHBP420E
ZHBP430E
ZHBP080E
AresPGBOptionSetup-F_FM.book Page 25 Monday, July 29, 2002 1:12 PM