Ricoh CL3000 Manual Do Utilizador
Operating Instructions
Administrator Reference
111
Web Browser
AAAA
Run the Web browser.
BBBB
Type the address "http:// (IP address of the printer you want to change the settings)".
The status of the selected printer is displayed on the Web browser.
CCCC
Click
[
Configuration
]
.
A dialog box that prompts you to type the user name and a password appears.
DDDD
Type the user name and the password, and then click
[
OK
]
.
Type only the password in this dialog box. The factory default password is "password".
EEEE
Change names and comments.
TCP/IP
A Click the
[
General
]
tab, and then type the name into the
[
Printer Name
]
box and comment
into the
[
Comment
]
box.
•
In the
[
Printer Name
]
box, type the name of the printer within 13 characters. The factory de-
fault name consists of "RNP" and the last 3 bytes of the MAC address on the Network Inter-
face Board. For example, when the MAC address is 00:00:74:62:7D:D5, the factory default
name is "RNP627DD5". No name of 9 characters is permitted if the prefix is "RNP". Also,
when DHCP is selected as an IP address setting, the number of characters is limited to within
13 characters.
face Board. For example, when the MAC address is 00:00:74:62:7D:D5, the factory default
name is "RNP627DD5". No name of 9 characters is permitted if the prefix is "RNP". Also,
when DHCP is selected as an IP address setting, the number of characters is limited to within
13 characters.
•
In the
[
Comment
]
box, type any comment on printers within 31 characters.