Breckwell P24FSA Manual Do Proprietário

 
Insert installations must be vented with 3” or 4” pipe. 
Pipe may be single wall stainless steel flexible pipe. 
Vent may terminate within chimney beyond a blanking 
plate or extend to the chimney top. See 
“COMBUSTION AIR SUPPLY” for outside air access 
information. 
 
The fireplace and chimney should be cleaned 
thoroughly before starting the installation. We suggest 
painting the interior of particularly old and dirty 
fireplaces to seal any odors. In zero-clearance 
fireplace installations, when the fireplace opening is 
above the floor or raised hearth, the adjustable 
“Breckwell P24 Z-C Skirt” (part # A-ZC-SKRT), or 
“Breckwell P24 Z-C Legs” (part #A-S-ZCLEGS), can 
be used to bridge the gap between the hearth and 
stove bottom. (Refer to figure 13) 

 

 
Follow the instructions packaged with the P24 
Flashing set part C-P24-MEDFL-C or C-P24-LGFL-C. 
(Refer to Figure 14)