Haier gde750aw Guia Do Utilizador

English

GDE/GDG 750AW

1. Turn the knob to any program except “OFF” to power on. The control panel

will  beep  once  and  the dryer  will  change  from “OFF”  to the operating  status.
If  Start/Pause  button is  not pressed  five  minutes after  powering  on,  the dryer
will  automatically  return to OFF  status.

2. Set the cycle select dial to Rack Dry Cycle.

3. Press “Timed Dry” button to set the required drying time.

4-6. Press “Temp” and “Signal” to define the required programs.

Note: For “Rack Dry” program use of “Temp” and “Signal” buttons is the

same as for auto-programs. “Dry Level” is inactive.

Other Features

Your dryer also has the following features for your convenience:

Lint Filter:

• All dryers come with a lint filter that needs to be cleaned before or after every

use (read “Care and Cleaning Guide” Section).

Leveling Legs:

• Your dryer has four leveling legs which are located in the front and rear corners

of your dryer. After installing your dryer in its final position, you can level your
dryer.

• Leveling legs can be adjusted by turning them clockwise to raise your dryer or

by turning them counterclockwise to lower your dryer.

R AC K DR Y C Y C L E

Timed Dry

Dry

Level

Temp

Signal

Cycle Select

Cycle Process

Auto Dry

Timed Dry

Clean Lint

Drying

Cool Down

W rinkle Saver

No rmal

Less

Louder

Softer

Off

High

Medium

Low

No Heat

Off

Timed Dry

Heavy Duty

Rack D ry

Normal

Touch Up

Whites

Delicates

GDE/GDG 750AW