Haier HDE5000AW Guia Do Utilizador
English
HDE/HDG5300AW
1. Touch the Power On/Off button
•
•
e
h
T
computer board will beep once and the dryer will change from off status
to the initial operating status (NORMAL program).
• fI the “Start/Pause” button is not touched in 5 min after powering on, it
automatically cuts off power and returns to off status.
•
e
h
T
dryer returns to off status immediately upon end of each cycle. Regardless,
the status of the control panel, touching OFF will stop all operations.
• The default status is “NORMAL” program.
AUTO DRY CYCLE
2. Press “Auto-Dry Cycles” button to select a suitable full automatic cycle.
•
e
h
T
NORMAL program will be automatically selected after powering on.
If another full automatic program is desired, touch “Auto-Dry Cycles” button
until corresponding indicator turns on.
• To select your desired settings, the “Custom Program” function should be chosen.
The dryer can memorize programs defined by user and display the previous
program upon next application of this function.
program upon next application of this function.
• After powering on, select “Auto-Dry Cycles”.
3. Touch “Dry Level” button to select a suitable drying level.
•
•
r
e
tf
A
powering on, the clothes dryer automatically sets dryness at “NORMAL”,
which means a longer drying time. If other drying level is desired, press
“Dry Level” button to select.
32
4 Touch “Signal” button, and the buzzer will sound upon end of a cycle.
•
r
e
tf
A
switching on, the dryer automatically sets buzzer at “Softer”. The user
may define three prompt sound conditions: “Loud”, “Soft” and “Off”.
5. Touch the “Wrinkle Saver” button to select a suitable reserved drying
program.