Haier HDE5000AW Guia Do Utilizador

Página de 124
The following sounds are normal during the operation of the dryer.
•  Tumbling sound: this is normal as the heavy wet clothes in the dryer are 
continuously being tossed around.
•  Air rushing noise: this happens as the dryer drum spins at very high RPM and    
the air is rushing through the dryer drum.
Tips
• For best drying results, clean the lint filter before or after every use.
• Do not overload the dryer.
• Balance the dryer load evenly throughout the dryer for the best result. 
• Drying time depends on many variables: load size, type of fabric and 
moisture in it, heat and moisture in the room, electric voltage, length of the 
exhaust duct, etc.
•  To eliminate guessing and to conserve energy,it is recommend for certain 
clothes to dry on an auto-drying setting.
•  Always follow the fabric care instructions supplied by the garment manufacturer.
NORMAL OPERATING SOUNDS
CARE AND CLEANING GUIDE
38
•  Lint filter needs to be cleaned before or after each use 
for your unit to operate at optimum efficiency. 
The filter can be removed by pulling on the tabs located 
on the inside of the dryer door. The filter may be washed 
or vacuumed. Remove the excess water from the filter by 
gently shaking the filter. This will remove dust and 
particles trapped in the filter. Lint built up in screen 
will restrict airflows, which causes longer drying 
times. After cleaning, slide the filter back in place. 
Do not use your dryer without the lint filter.
• Do not use any type of spray cleaner when cleaning the interior.
•  Hazardous fumes or electric shock could occur. If dryer drum becomes 
stained, clean the drum with damp cloth. Remove any residue before 
drying next load.
•  Clean the cabinet with mild soap and water. Do not use harsh or 
abrasive cleaners, as this could damage the dryer.
•  Clean the duct and the vent on a regular basis to avoid clogging 
which could affect the efficiency of the dryer.
Lint Filter
English
WARNING!
Over time,the lint from the drying 
process collects around the lint filter 
shield,and the lint can be easily 
removed using your vacuum cleaner,
at least once a month.