Haier HLP140E Guia Do Utilizador

Página de 16
Trouble Shooting
(If problems occur, please pull out the plug to check)Before calling out a Service engineer have 
a quick look through the following fault list- it could have save a lot of time and trouble. If your 
machine is still not working properly you should contact your nearest Service office or obtain
after sales service quickly. Please do not fix the machine by yourself.
SYMPTOM
CAUSE
CURE
Close the front door.
Is a garment filling occurs when the 
machine is working?
Is the Temperature button Indicator
light indicating "Air Dry"?
Drum won't turn.
(The three indicator
 lights of Cycle
button  are on at the 
same time)
Dryer won't heat.
Reset the "Temp" button till the 
indicator light indicates "High"
 or "Low", and the light is on.
Rinse the filter-net clear.
Is the outlet filter-net been 
blocked?
Dryer won't heat.
Has the Power/ ON/OFF, or 
Start/Pause button been
pressed in?
No power to machine
Is the plug properly put in the 
socket?
Reduce the garments amount.
Are the garments fully dehydrated?
Got the garments fully 
dehydrated.
Have you dried too many garments
in weight?
Garments won't dry
enough. ( Not all the 
garments are dry
enough after the
machine stops work)
Is the front door properly shut?
Have the garments got tangled up?
Separate the tangled-up
garments and make them dried.
Are the easy/hard dry clothes not
sorted?
Select out the garments that 
not dry to make them dried.
Select out the garments that 
not dry to make them dried.
Is the dryer standing position 
narrow and stuffy?
Place the machine in a position
that ventilate well.
This is probably as a result of 
the heat been absorbed by the
wet clothes for a while when
starting the machine, after 30 
minutes it will be normal.
Is the clothes dryer working?
Press in the Start/Pause 
button.
You may have chosen the "Auto-Dry"
 mode of drying if the garments are 
not dried over 5 hours .
( Referring to symptom 3)
Drum won't turn.
(The "150", " 90", 
"60” indicator lights
 of Drying Time
button are on at the 
same time)
After troubleshoot problem 3, 
press in the Power/ ON/OFF,
or Start/Pause button.
Reset circuit breaker; use the 
machine when there is power.
Check and tighten plug.
Close the front door.
Press in the Power/ ON/OFF,
or Start/Pause button.