Haier wm6002a Manual Do Utilizador
Press " WATER LEVEL "button,
select suitable water level
After switching on the power, the washing machine will execute fuzzy program automatically to detect the cloth.
After detection, it can set the water level automatically. To select other water level, first push the "START/PAUSE"
button, then push the "WATER LEVEL" button to set the water level. Refer to "standard dosage of the detergent
and water quantity"in Page 9 and "water level button"in Page 11 for selection.
After detection, it can set the water level automatically. To select other water level, first push the "START/PAUSE"
button, then push the "WATER LEVEL" button to set the water level. Refer to "standard dosage of the detergent
and water quantity"in Page 9 and "water level button"in Page 11 for selection.
Page 9
Using process
Using process
.
Even there's no water in the tub, a certain period is
required before spin starting.
Do not use the soak program for the woollen textiles.
Separate the laundries that are not colorfast from
other laundries in washing.
The pulsator will not rotate unless the water is
filled to selected water level.
Even there's no water in the tub, a certain period is
required before spin starting.
Do not use the soak program for the woollen textiles.
Separate the laundries that are not colorfast from
other laundries in washing.
The pulsator will not rotate unless the water is
filled to selected water level.
Attention
Page 11
Water Level and Time Table for Each Program (self programming not included)
After switching on the power, the washing machine will set to common program including"wash, rinse,
spin "automatically. To select other procedures, push the "SOAK", " WASH", " RINSE" or "SPIN"
button to select the time of soak, wash and spin, and the times of rinse. After switching on the power,
if you push one of the button among "WASH", "RINSE"and"SPIN", the digitron of the former proce-
dures will turn off automatically. The former procedures will not run. For instance: after switching on the
power. If you push the "spin" button first, it will execute spin singly after starting.
spin "automatically. To select other procedures, push the "SOAK", " WASH", " RINSE" or "SPIN"
button to select the time of soak, wash and spin, and the times of rinse. After switching on the power,
if you push one of the button among "WASH", "RINSE"and"SPIN", the digitron of the former proce-
dures will turn off automatically. The former procedures will not run. For instance: after switching on the
power. If you push the "spin" button first, it will execute spin singly after starting.
The soak procedure can work in cooperation with automatic programs like normal, jean, fiber and cotton.There
is intermittent pulsator stirring during soak.
After the machine starts operation, you can only set the program and procedure during washing, and can not
make setting in other cases.
After the machine starts operation, you can only set the program and procedure during washing, and can not
make setting in other cases.
PROGRAM
Water
level
Wash
(min)
Rinse (min/time)
Spin (min)
Total time
(min)
NORMAL
1-10
About
10-16
10-16
Save water program, total 10 around
About 19-25
QUICK
1-10
About 5
Save water program, total 10 around
About 15
POSTHASTE 3
About 2
Save water program, total 4 around
About 6
JEAN
1-10
About 20
Rinse twice, about 5 each
time
time
About 6
About 54
FIBRE
1-10
About 12
Rinse twice, about 3
About 4
About 41
COTTON
1-10
About 10
Rinse twice, about 3
About 4
About 49
WOOLLEN
1-10
About 3
Rinse twice, about 2
About 3
About 24
SILK
1-10
About 5
Rinse twice, about 2
About 3
About 30
WATER
LEVEL
LEVEL