Haier wm6002a Manual Do Utilizador

Página de 20
Using process
Using process
1 Preparation before washing
Confirm if there's
special requirement
for the laundries.
Clear the pocket.
Take out the coins ,
sand,hairpins etc.
Fasten the buttons
and zippers.
When the pulsator is 
running ,the buttons of
the laundries may cause
noise. For the sake of 
discretion ,please put
 the  laundries with
 buttons into other
 laundries.
Preparation before washing
The quantity of the
laundries shall not
exceed the rated
value. The big
 laundries like the
 jeans shall be put
in loosely.
Pay attention to followings before washing the laundries 
1.Connect the water inlet hose.
2.Confirm  that the washing machine is earthed 
   reliably .  Then insert the power plug into the
   receptacle. Do not connect the  earth  terminal
   to  the gas pipe and tap water pipe.
3.Put down the drain hose. 
a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries with unfast color from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,
    please apply detergent in advance, which can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.
f. Do not put those laundries polluted by chemicals directly into the washing machine.
g. For  those  small  laundries and those may get twisting or worn,  and woolen/fur laundries,  please put them into
   mesh bag for washing.