Haier xpb55-13s Manual Do Utilizador

Página de 10
Selection of the quantity of the washing powder                  list 1 
Selection of the current , water level and  washing  time     list 2 
How to use the washing powder
How to use the whitener
Fill water to decided level.  Dilute the whitener with container.  Pour it slowly into the
washing tub. 
Avoid  using  whitener  on  laundries with color or pattern as they are prone to lose color. 
The  whitener  shall  not  touch  the laundries directly. 
Direct dissolved in the machine:
1.Fill small quantity of water.
2.Add the powder .  Run for  30 seconds  to 
   dissolve it completely.
3.Put it in the laundries. Select suitable 
   water level.
The instant dissolving of the washing powder:
1.Prepare warm water of 30 C and a container.
2.Add the powder while stirring to fully
   dissolve it. 
The powder is more prone to pollute the
laundries than the detergent. Therefore
please use it with proper quantity. 
It is suggested not to use high sudsing
detergent.
Dosage of different washing powder is
different. Please refer to the instruction
of  the  washing  powder  for  the  detail
dosage.
Refer  to  the  user's  manual  for  the usage and quantity of the whitener. 
For powder whitener, please dissolve it before using. 
Laundries
 quantity
Laundries
 quantity
Water level
Water level
Current
Standard dosage
Concentrated washing 
          powder
Laundries
Common  washing 
          powder
Washing  time 
   (minutes)
Water quantity
Water quantity
About
About
About3~6
About8~10
About10~13
About7~13
About2~4
About3~6
About8~10
About
About
About
About
3.6kg~5.5kg
2.4kg~5.5kg
2.0kg~3.6kg
Below2.0kg
Below2.4kg
MAX (about43L)
MAX (about43L)
Strong
MIN (about30L)
MIN (about30L)
            ~
Standard
MED (about36L)
MED (about36L)
              ~
MED (about36L)
36g
30g
25g
43g
36g
30g
Usage  of  the detergent
Using process
Using process
Knitwear
Cotton,blending,linen
Very dirty and thick
Bed sheet
Silk(thin laundries)
Chemical fiber
Cotton,blending,linen
 OFF
Washing sequence
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
    WOOL
 SPIN
WASH
WASH TIMER
             LINEN
Using process
Using process
Wash
 SILK
  COTTON
DRAIN
DRAIN
STRONG
STRONG
STANDARD
WASH SELECTOR
WASH SELECTOR
1.Water inlet selector
   (1) Set the water inlet selector at the "WASH" side.
   (Figure 1)
   (2) Set the water level adjusting lever to needed line.
2. Fill the water and add the dissolved washing 
   powder to make the water level reach the preset 
   position. (Figure 2)
   Run washing program for some time to stir and 
   dissolve the powder completely.
3.Put in the laundries. If the water quantity is 
  insufficient, please add water.
4.Select the current.
   Select the strength of the current according to
   the laundries. (Figure 3)
5.Select the washing time
   Select the washing time according to the laundries. 
  (Figure 4)
6.After washing, the buzzer will ring. Set the "WASH
  SELECTOR" at "DRAIN". (Figure 5).
 OFF
 OFF
 OFF
DRAIN
STRONG
STANDARD
MAX
    WOOL
    WOOL
 Spin timer
 SPIN TIMER
Wash timer
WASH TIMER
WASH SELECTOR
Wash selector
Buzzer
BUZZER
 Water-filling entrance
(To set to below 2 minute,
first set to 6 minute then
turn it back. it can increase
the service life of the timer).
             LINEN
 (soft current,
 strong current)
(The buzzer will ring when
 the washing finishes)
 (to  set  to below 1 minute, 
 first  set  to  2  minute then 
 turn it back. it can increase
 the service life of the timer).
 SILK
 SILK
  COTTON
Overfilling sign
Water-filling selector handle