Frigidaire glcs378dsa Ficha De Dados
4
Lock in normal
position
position
Lock engaged
for door removal
for door removal
HINGE SLOT Door
removed from the range
removed from the range
OVEN DOOR REMOVAL AND REPLACEMENT
To Remove the Oven Door:
1. Disconnect range from electrical supply
2. Open the door to the fully opened position.
3. Pull up the lock located on both hinge supports and engage it in the hinge levers. You may have to apply a little
1. Disconnect range from electrical supply
2. Open the door to the fully opened position.
3. Pull up the lock located on both hinge supports and engage it in the hinge levers. You may have to apply a little
downward pressure on the door to pull the locks fully over the hooks.
4. Grab the door by the sides, pull the bottom of the door up and toward you to disengage the hinge supports.
Keep pulling the bottom of the door toward you while rotating the top of the door toward the range to com-
pletely disengage the hinge levers.
pletely disengage the hinge levers.
To Replace the Oven Door:
1.
1.
Grab the door by the sides; place the hinge supports in the hinge slots. Open the door to the fully opened
position.
position.
2.
Disengage the lock from the hinge levers on both sides.
Note: Make sure the hinge supports are fully engaged before unlocking the hinge levers.
Note: Make sure the hinge supports are fully engaged before unlocking the hinge levers.
3.
Close the oven door.
The door is heavy. After removing door, lay it flat on the floor with the inside of the door facing down.