ATN nvb10x-cgt Guia Do Utilizador
4
450 mw infa-ed illminato
The 450 mW IR Illuminator is powered
by a separate from the main unit bat-
tery. To install the battery unscrew
the cap and insert a battery the way
shown at the diagram on the IR.
To install the 450mW IR Illuminator
To install the 450mW IR Illuminator
onto the bi-ocular loosen the clamp
of IR Illuminator, insert his rail into
the bracket of bi-ocular and screw the
clamp.
The IR illuminator control buttons are located on its side. To switch the Digital IR illumina-
The IR illuminator control buttons are located on its side. To switch the Digital IR illumina-
tor on/off press “+” and “-” buttons simultaneously. When the IR illuminator is switched
on you can see the green LED lit. By pushing the buttons “
+” and “-” you may adjust the
IR brightness.
The IR beam is focusable to change the field of coverage. To change the beam width
The IR beam is focusable to change the field of coverage. To change the beam width
slightly turn the IR lens.
You could change the IR control panel fitting your needs. The screw-tool from the kit
You could change the IR control panel fitting your needs. The screw-tool from the kit
should be used for weakening the clamp located on the IR. Rotate the IR placing it in the
most convenient position. Tighten the clamp with the screw-tool to fix the new position.
Stoage and cae
• If the device is not to be used for extended period of time (more than 10 days) remove
the battery.
• Avoid touching lenses. If fingerprints or traces of dirt or dust appear, clean their surface
with a Photographic lens cleaning tissue.
• Keep lens cap/daylight filter on when not in use.
• The NVB10X is not harmful to the user or the environment.
• Do not disassemble except to clean the front lens and eyepiece:
• The NVB10X is not harmful to the user or the environment.
• Do not disassemble except to clean the front lens and eyepiece:
it will void your war-
ranty.
• Evaluate the scope function by looking through it in a lit environment
with the daylight
filter lens cap on. never use in daylight without the daylight filter lens cap on.
•
never point the nVB10X at a bright light source.
• Adverse atmospheric conditions such as fog, smog, or haze and a lack of ambient light
(moon or starlight) may diminish the effective viewing distance.
• If you use the rubber eyecaps for a long period of time, you may suffer skin inflammation.
If you develop any symptoms, consult a doctor immediately.
Battery
Housing
Clamp
IR Elevation
IR Windage
IR Focusing
IR Brightness Adjustment