Microtek mx3 Guia Do Utilizador

Before you use the projector, please read this manual thoroughly and

comply with the safety instructions hereunder. Improper use may cause

fire, electric shock, injuries, or reduce the life of your projector.

Warning: Ensure the projector is grounded properly by connecting the

power cord to a grounded AC outlet. Do not defeat the safety

purpose of the grounding type plug.

Warning: Do not cover the lens when the lamp is on.

Warning: To protect your eyes, please do not look at the projector’s

light source.

Warning: To replace the lamp, please turn off and unplug the projector

first, then wait for 1 hour before replacing the lamp. Please

refer to page 23, “Replacing the lamp”, for operating

procedures.

Warning: Use the power cord that comes with your projector. Use the

grounded jack for safety.

Warning: Do not block the openings around the projector for safety.

Warning: Do not place any liquids on top of the projector. The projector

can be damaged if wet.

Warning: Do not place the projector in excessively warm or humid

areas, and avoid direct sunshine.

Warning: To avoid electric shock, do not dismantle the projector by

yourself if the projector malfunctions for any reason.

Warning: Be careful when you move or carry the projector to prevent it

from dropping.

ＭＸ３　ｍａｎｕａｌ．ｐ６５

02-12-17, 16:39

2