Microtek vs1 Guia Do Utilizador

Important: The lamp contains trace amounts of mercury.  Some government
required special disposal of lamps containing mercury.  Special disposal
procedures for lamps containing mercury. Be sure disposal of lamps are
carried out in accordance with all applocable local and government laws in
your area.

The lamp module should be replaced with a certified replacement part.  To
order a new lamp, contact your local dealer.

After changing the lamp module, see “Lamp Hours Reset” on page 15 to
reset lamp hours.

Warning:

1.When replacing the lamp, be sure to turn off power and unplug the power

cord.  To avoid burns, wait 45 minutes before opening the lamp module
door,and do not touch any hot surfaces inside.

2. Do not loosen or remove any screw other than the lamp module or its door.

Doing otherwise may cause electric shock.

1. Turn off the projector and let the unit cool down at least 45 minutes.

2. Unplug the power cord from projector.

3. Turn the projector upside down.  Loosen the screw with a flat head screw-

driver then lift up to remove the lamp module door and keep screw on the
door carefully.

 19

ＬＣＤ　Ｐｒｏｊｅｃｔｏｒ　Ｕｓｅｒ　Ｇｕｉｄｅ．ｐ６５

02-6-19, 14:07

19