Microtek vs1 Guia Do Utilizador
Starting the Presentation
We recommend turning on the projector and image sources in the order
listed here.
listed here.
1. Connect the signal cable to the computer or video source.
2. Connect the power cord to the projector and to a power source. The Power
light begins to blink.
3. Turn on the presentation components in the order listed. To turn on the
projector, remove the lens cap and press the Power button on either the
remote control or the keypad when the lamp ready LED is on.
remote control or the keypad when the lamp ready LED is on.
Note: Not all these components may be needed for your presentation, but an
exhaustive list is presented below for reference.
exhaustive list is presented below for reference.
• Video source such as VCR, VCD, DVD or digital camera
• Audio source if different from your video source or computer
• Projector
• Computer
• Projector
• Computer
Note : Many laptop computers do not automatically turn on their external
video port when another display device is connected. Refer to your
computer’s user guide for the function key or command that activates
the port. MAC users may need to turn on SimulSCAN or monitor mirror-
ing. Refer to the computer manual.
video port when another display device is connected. Refer to your
computer’s user guide for the function key or command that activates
the port. MAC users may need to turn on SimulSCAN or monitor mirror-
ing. Refer to the computer manual.
Power button
LCD Projector User Guide
LCD Projector User Guide
8
ＬＣＤ Ｐｒｏｊｅｃｔｏｒ Ｕｓｅｒ Ｇｕｉｄｅ．ｐ６５
02-6-19, 14:07
8