Clover cdr-1610 Manual Do Utilizador
■
MAC ID
▪ MAC ID is the connecting address for Ethernet, and every unit has 12digit address (HEX
6 byte). This address was already set with factory default.
■
Bandwidth
▪ There are four types of bandwidth available such as 56Kbps, 128~64Kbps,
768~256Kbps, and 10Mbps.
▪ Connecting network, you can select the network speed according to your network
environment. It gives to you better network speed if you select a proper bandwidth.
▪ Click the “BANDWIDTH” button, and then select a bandwidth by mouse wheel or
“UP/DOWN” key on the front panel.
■
Server
THIS SERVER IS FOR DYNAMIC DOMAIN NAME SERVICE (DDNS), NOT
AVAILABLE AT THIS TIME, BUT CLOVER WILL START THE SERVICE IN THE
FUTURE.
FUTURE.
▪ Click the “SERVER” button on the Network Configuration Window, it will show the
Network Server Configuration Window.
▪ Click the “EXIT” button on the Network Server Configuration Window, it will return to the
Network Configuration Window.
Figure 3-55: Network Server Configuration Window
[Server]
▪ You can select “Enable” or “Disable” by mouse clicking or pressing the “ENTER” key on
▪ You can select “Enable” or “Disable” by mouse clicking or pressing the “ENTER” key on
the front panel.
- ENABLE: MAC Name Server is working.
- DISABLE: MAC Name Server is not working.
- DISABLE: MAC Name Server is not working.
[IP Address / Port]
▪ Click the “IP ADDRESS / PORT” button, it will show On Screen Keyboard.
▪ Enter the IP address for the networking server by using On Screen Keyboard, and then
▪ Click the “IP ADDRESS / PORT” button, it will show On Screen Keyboard.
▪ Enter the IP address for the networking server by using On Screen Keyboard, and then
click “OK” button to set it.
▪ Click the “CANCEL” button to return to the origin value.
[Site Name]
▪ It enables you to set the site name of DVR when you connect via MNS (Mac Name
▪ It enables you to set the site name of DVR when you connect via MNS (Mac Name
Server) with remote host software.
▪ Click the “SITE NAME” button, it will show On Screen Keyboard.
▪ Enter the site name of DVR by using On Screen Keyboard, and then click “OK” button to
▪ Enter the site name of DVR by using On Screen Keyboard, and then click “OK” button to
set with new site name.
- 58 -