Microtek 3700 Guia Do Utilizador

Menu bar

scanner list is used, and ScanWizard 5 will not find or add any new 

scanners to the scanner list. This is a short-cut command without 

invoking the Scanner Driver Manager.

This command displays the detected scanner devices.

If your scanner does not show in the list, make sure it is connected 

and turned on, then click on the Probe button in the dialog box.

To add a scanner:

Follow the hardware installation instructions for connecting a 

scanner to your system. Then use the Scanner Driver Manager in 

ScanWizard 5 to find the connected scanner in your scanner list.

1.  Go to the Scanner menu in the Preview window, and choose 

Scanner Driver Manager. A dialog box will appear showing the 

connected scanner and the corresponding interface ID number.

2.  Click the Find Scanners button. In case you have added new 

scanners, the newly found scanners will be appended to the 

scanner list. If a scanner on the list is not detected (not turned 

on, not ready, or removed from the system), the model will 

not be removed from the list but will have a question mark 

before it.

3.  Click the Close button to close the dialog box.

To remove a scanner from your scanner list:

1.  Go to the Scanner menu in the Preview window, and choose 

Scanner Driver Manager.

file:///D|/sw56/Menu_bar.htm (3 of 20) [12/16/03 11:57:50 PM]