Novation remote sl Guia Do Utilizador
54
To control the ReGroove Mixer from the ReMOTE SL, select the ‘Transport’ track in the Reason sequencer:
Use buttons 1-4 in the lower left-hand row of buttons to switch the ReMOTE SL between controlling banks A to D of the
ReGroove mixer.
ReGroove mixer.
When controlling Mixer 14:2 you can switch between controlling channels 1-7 and 8-14 using the LEFT-HAND
SCROLL buttons.
SCROLL buttons.
Controlling Reason running in ReWire Mode
If you use Reason in ReWire mode with another sequencer then it is possible to switch the ReMOTE SL between controlling
your main sequencer and Reason, however this may require you to set up the ReMOTE SL slightly differently with Reason.
All sequencers that use Sequencer Automap for control use USB port 2 to communicate with the ReMOTE SL. If your main
sequencer and Reason are both listening for Automap data from the ReMOTE SL on port 2 then data which is intended for
one program will also get passed to the other and cause unexpected parameter changes.
If you use Reason in ReWire mode with another sequencer then it is possible to switch the ReMOTE SL between controlling
your main sequencer and Reason, however this may require you to set up the ReMOTE SL slightly differently with Reason.
All sequencers that use Sequencer Automap for control use USB port 2 to communicate with the ReMOTE SL. If your main
sequencer and Reason are both listening for Automap data from the ReMOTE SL on port 2 then data which is intended for
one program will also get passed to the other and cause unexpected parameter changes.
If your main sequencer uses Automap Universal for mixer control i.e. if you use Cubase, Nuendo, Sonar or Tracktion, there
will be no problem as USB port 3 is used for communication between the Automap Universal Server and the ReMOTE SL,
leaving port 2 free for communication with Reason. Simply set up Reason as instructed above and then switch between
the Automap Universal template (template 38) and the Reason Automap template (template 37) when you want to switch
from controlling your sequencer mixer or Automap-wrapped plug-ins to controlling Reason.
will be no problem as USB port 3 is used for communication between the Automap Universal Server and the ReMOTE SL,
leaving port 2 free for communication with Reason. Simply set up Reason as instructed above and then switch between
the Automap Universal template (template 38) and the Reason Automap template (template 37) when you want to switch
from controlling your sequencer mixer or Automap-wrapped plug-ins to controlling Reason.
If you use Logic, Ableton Live, Pro Tools or Digital Performer as your main sequencer and run Reason in ReWire mode then
you will need to set up Reason so that it communicates with the ReMOTE SL using USB port 3. Although port 3 is reserved
for communication between the ReMOTE SL and the Automap Universal Server, the Automap system has been designed
so that the Server will ignore messages intended for Reason. Set up Reason as instructed above and then carry out the
following steps:
you will need to set up Reason so that it communicates with the ReMOTE SL using USB port 3. Although port 3 is reserved
for communication between the ReMOTE SL and the Automap Universal Server, the Automap system has been designed
so that the Server will ignore messages intended for Reason. Set up Reason as instructed above and then carry out the
following steps:
1. Select the Reason Automap template (template 37) on the ReMOTE SL and press the TEMPLATE button to enter
the Template menu.
2. Set KeybPort to ‘ComnPORT’.
3. Set ComnPort to ‘U3’.
4. Press WRITE three times to save the settings and then the PLAY mode button to return to Play mode.
5. Launch Reason and go to the ‘Control Surfaces and Keyboards’ page of the Reason preferences.
6. Click on the ReMOTE SL in the list to select it and then click ‘Edit’ to access its settings.