Nortel 4134 Guia De Configuração Rápida
24
Installing the Secure Router 4134 chassis and hardware components
The following table lists the accessories you can find in the shipping
container with the Secure Router 4134. Place a mark in the third column of
the table to verify that you have received each accessory.
container with the Secure Router 4134. Place a mark in the third column of
the table to verify that you have received each accessory.
Table 1
Secure Router 4134 accessories
Secure Router 4134 accessories
Accessory
Function
Verified
Rack mounting bracket
kit that contains two rack
mounting brackets and
20 Phillips-head screws.
kit that contains two rack
mounting brackets and
20 Phillips-head screws.
Supports the chassis in an equipment rack.
The screws for the mounting brackets are 8-32 x 1/4
in. (12).
There are two types of screws for the rack mount:
For telecom racks—12-24 x 5/8 in. Phillips (4)
For cabinets—10-32 x 1/2 in. Phillips (4)
The screws for the mounting brackets are 8-32 x 1/4
in. (12).
There are two types of screws for the rack mount:
For telecom racks—12-24 x 5/8 in. Phillips (4)
For cabinets—10-32 x 1/2 in. Phillips (4)
Console cable
Connects a management console to the chassis.
Female DB-9 to RJ-45
connector
connector
Use, if necessary, to connect the console cable to a
terminal or PC.
terminal or PC.
Power cord
Country-specific power cord provided for AC input. One
power cord is provided for each power supply module
you ordered.
The power cord is a no-charge item that is supplied
with the chassis, however it must appear as a separate
item on your order.
power cord is provided for each power supply module
you ordered.
The power cord is a no-charge item that is supplied
with the chassis, however it must appear as a separate
item on your order.
Terminal (ground) lug and
two screws
two screws
Connects the ground wire to the front panel of the
chassis.
Screws:
8-32 x .187-in. pan head screws with external tooth
washer (2)
chassis.
Screws:
8-32 x .187-in. pan head screws with external tooth
washer (2)
Software and
documentation CD
documentation CD
Contains the Secure Router 4134 Release 10.0 software
image file, as well as the installation and configuration
manuals.
image file, as well as the installation and configuration
manuals.
Installing a power supply module
The Secure Router 4134 operates with one or two AC power supplies, one
or two DC power supplies, or one AC and one DC power supply. You install
the power supplies at the rear of the unit.
or two DC power supplies, or one AC and one DC power supply. You install
the power supplies at the rear of the unit.
Average time to install one power supply module: 1 minute.
CAUTION
Risk of equipment damage
Watch the power supply status LED for alerts if you hot swap
a power supply module.
a power supply module.
Nortel Secure Router 4134
Quick Start
NN47263-100
01.01
Standard
10.0
16 July 2007
Copyright © 2007, Nortel Networks
.