Nortel 4134 Guia De Configuração Rápida
Grounding the chassis
29
•
Ensure you have allotted adequate space in and around the equipment
rack for installation of the Secure Router 4134.
rack for installation of the Secure Router 4134.
•
Ensure you have the screws that shipped with the chassis.
•
Ensure you have a Phillips screwdriver #2.
•
Ensure the mounting brackets are firmly installed on the chassis.
•
Ensure you have appropriate antistatic materials.
•
Nortel recommends you have two people to help lift the chassis into the
equipment rack and securing it.
equipment rack and securing it.
•
Ensure your installation site meets the physical, electrical, and
environmental requirements described in
environmental requirements described in
. Site location is important for the proper operation of the
Secure Router 4134. Place the unit in a clean, dry environment with
adequate air circulation. Allow 2 to 3 feet (0.61 to 0.91 m) of additional
clearance around the Secure Router 4134 for access to the cable
connectors on the front and rear panels.
adequate air circulation. Allow 2 to 3 feet (0.61 to 0.91 m) of additional
clearance around the Secure Router 4134 for access to the cable
connectors on the front and rear panels.
Procedure steps
Step
Action
1
With two people, lift the chassis into available rack space.
2
Ensure that the chassis is level, and align the screw holes on the
chassis brackets with those on the equipment rack.
chassis brackets with those on the equipment rack.
3
Insert the mounting screws. Space the screws evenly to hold the
chassis in the frame.
chassis in the frame.
—End—
Grounding the chassis
You must properly ground the Secure Router 4134 before you place it
in service. You can connect your ground wire to the grounding strip of
the equipment rack, but you must also ensure that the equipment rack is
properly grounded.
in service. You can connect your ground wire to the grounding strip of
the equipment rack, but you must also ensure that the equipment rack is
properly grounded.
For all installations, you must provide proper grounding through a UL listed
terminal attached to the grounding location on the front panel of the router.
The grounding lug, as well as the screws and washers necessary to attach
it to the Secure Router 4134, ship in the container with the Secure Router.
terminal attached to the grounding location on the front panel of the router.
The grounding lug, as well as the screws and washers necessary to attach
it to the Secure Router 4134, ship in the container with the Secure Router.
Average time to install the grounding terminal: 1 minute.
Nortel Secure Router 4134
Quick Start
NN47263-100
01.01
Standard
10.0
16 July 2007
Copyright © 2007, Nortel Networks
.