Nortel 4134 Guia De Configuração Rápida
Installing the interface modules
35
—End—
Installing a Large Module
Use the procedure in this section to install a Large Module in the Secure
Router 4134. You can install a Large Module to span slots 6 and 7 only.
Router 4134. You can install a Large Module to span slots 6 and 7 only.
Procedure steps
Step
Action
1
Use a Phillips screwdriver to remove the slot cover plates from slots
6 and 7.
6 and 7.
2
Loosen the captive screw at the top of the center slot module guide.
3
Remove the center slot module guide. The following figure shows
the removal of the center slot guide.
the removal of the center slot guide.
4
Align the Large Module with the slot and the slot module guides
on the outside edges of the slot.
on the outside edges of the slot.
5
Slide the module into the chassis until its connector panel touches
the chassis back panel.
the chassis back panel.
6
Push gently, but firmly, to seat the connector on the interface module
in the chassis back panel.
in the chassis back panel.
7
Ensure the levers on the module are flush with the front panel of
the Secure Router 4134.
the Secure Router 4134.
Nortel Secure Router 4134
Quick Start
NN47263-100
01.01
Standard
10.0
16 July 2007
Copyright © 2007, Nortel Networks
.