Nortel 4134 Guia De Configuração Rápida
Connecting power cables
41
Connecting AC power cables
Average time to install one AC power cable: 1 minute.
CAUTION
ESD
Always wear an ESD-preventative wrist strap when you connect
cables or perform maintenance on a Secure Router 4134. Ensure
that the wrist strap makes contact with your skin.
cables or perform maintenance on a Secure Router 4134. Ensure
that the wrist strap makes contact with your skin.
Prerequisites
•
Ensure you have one or two appropriately rated AC power cords,
depending on your configuration. Power cords ship with the Secure
Router 4134 chassis.
depending on your configuration. Power cords ship with the Secure
Router 4134 chassis.
•
Ensure the power cord or cords are long enough to plug the male end
into a standard 110/220 V AC power outlet.
into a standard 110/220 V AC power outlet.
Procedure steps
Step
Action
1
Insert the female end of an appropriately rated AC power cord in
the AC receptacle on the rear panel of the Secure Router 4134,
as shown in the following figure.
the AC receptacle on the rear panel of the Secure Router 4134,
as shown in the following figure.
2
Insert the male end of the power cord in a standard 110/220 V AC
power outlet.
power outlet.
Nortel Secure Router 4134
Quick Start
NN47263-100
01.01
Standard
10.0
16 July 2007
Copyright © 2007, Nortel Networks
.