Nortel 4134 Guia De Configuração Rápida
49
Configuring the Secure Router 4134 for
remote access
remote access
You must connect a local terminal and log on to the Secure Router 4134 to
initially configure the system.
initially configure the system.
Connecting a terminal for local access
You use the console port to initially configure the system. The following
figure shows the location of the console port on the rear panel of the Secure
Router 4134.
figure shows the location of the console port on the rear panel of the Secure
Router 4134.
Figure 4
Connecting a terminal to the Secure Router 4134 console port
Connecting a terminal to the Secure Router 4134 console port
To access the command line interface (CLI) using the rear panel console
port, connect a terminal or a workstation that runs terminal emulation
software to the Secure Router 4134 using the console cable that ships
with the unit.
port, connect a terminal or a workstation that runs terminal emulation
software to the Secure Router 4134 using the console cable that ships
with the unit.
Prerequisites
•
Ensure you have the supplied console cable.
Nortel Secure Router 4134
Quick Start
NN47263-100
01.01
Standard
10.0
16 July 2007
Copyright © 2007, Nortel Networks
.