Nortel 4134 Guia Do Utilizador
130
IPsec VPN configuration
4
To enable or disable anti-replay, enter:
[no] anti-replay
—End—
Enabling or disabling the IPsec policy entry
Enable or disable the IPsec policy entry.
Procedure steps
Step
Action
1
To enter the configuration mode, enter:
configure terminal
2
To specify crypto configuration for IPsec and IKE, enter:
crypto
3
To specify the IPsec policy to configure, enter:
ipsec policy <policy-name> <peer-gateway-ip>
4
To enable or disable the IPsec policy, enter:
[no] enable
—End—
Specifying the IP stream on which to apply IPsec
Specify the IP stream on which to apply IPsec.
When this command is entered, a default proposal is created, with the
following properties: priority 1, ESP, 3DES, SHA1, DH-group2, tunnel mode.
following properties: priority 1, ESP, 3DES, SHA1, DH-group2, tunnel mode.
Procedure steps
Step
Action
1
To enter the configuration mode, enter:
configure terminal
2
To specify crypto configuration for IPsec and IKE, enter:
crypto
3
To specify the IPsec policy to configure, enter:
ipsec policy <policy-name> <peer-gateway-ip>
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.