Nortel 4134 Guia Do Utilizador
138
IPsec VPN configuration
Table 63
Variable definitions
Variable definitions
Variable
Value
<policy-name>
Specifies the IKE policy name.
group-type {modecfg-gr
oup | l2tp-group}
oup | l2tp-group}
modecfg-group: Mode config group. To configure
the mode config client parameters, use the
the mode config client parameters, use the
ike
policy client configuration
and
ike
policy client authentication
commands.
l2tp-group: L2TP group. To configure the L2TP
server and client parameters, use the
server and client parameters, use the
l2tp-server
commands.
Configuring the IKE policy local address for remote access VPN
Configure the local address to be used in IKE negotiations.
Procedure steps
Step
Action
1
To enter the configuration mode, enter:
configure terminal
2
To specify crypto configuration for IPsec and IKE, enter:
crypto
3
To specify configuration of remote access IKE policies, enter:
dynamic
4
To specify the remote access IKE policy to configure, enter:
ike policy <policy-name> {modecfg-group | l2tp-group}
5
To configure the local address, enter:
local-address <A.B.C.D>
—End—
Configuring the IKE policy local ID for remote access VPN
Configure the local ID to specify the IPsec identifiers for the host that is used
in the identification payload during IKE negotiation.
in the identification payload during IKE negotiation.
Procedure steps
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.