Nortel 4134 Guia Do Utilizador
Configuring PMTU
163
Configuring the keepalive retry interval
Configure the number of seconds between the DPD retries, in multiples of
10 seconds. Default is 10 seconds.
10 seconds. Default is 10 seconds.
Procedure steps
Step
Action
1
To enter the configuration mode, enter:
configure terminal
2
To specify crypto configuration for IPsec and IKE, enter:
crypto
3
To configure the disable dead peer detection keepalive retry interval,
enter:
enter:
keepalive retry-interval <retry-interval>
—End—
Configuring the keepalive transmit-interval
Configure the keepalive transmit interval.
Procedure steps
Step
Action
1
To enter the configuration mode, enter:
configure terminal
2
To specify crypto configuration for IPsec and IKE, enter:
crypto
3
To configure the disable dead peer detection keepalive transmit
interval, enter:
interval, enter:
keepalive transmit-interval <10-3600>
—End—
Configuring PMTU
Configuring DF bit
Configure the value of the Don’t Fragment (DF) bit for an interface.
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.