Nortel 4134 Guia Do Utilizador
181
GRE and IPIP tunnel configuration
Configuration steps for tunnel config:
Step
Action
1
Create the tunnel.
2
Configure the tunnel mode.
3
Configure an IP address for the tunnel
4
Configure the tunnel source
5
Configure the tunnel destination.
6
Configure optional parameters.
7
Configure a static or dynamic IP route to reach the tunnel end point.
—End—
Configuring a tunnel
To configure a tunnel, you must perform the following five procedures.
Creating a tunnel
Create a tunnel.
Procedure steps
Step
Action
1
To enter configuration mode, enter:
configure terminal
2
To specify the name of the tunnel to create, enter:
interface tunnel <tunnel-name>
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.