Nortel 4134 Guia Do Utilizador
Configuring 802.1x on an Ethernet interface
211
—End—
Table 116
Variable definitions
Variable definitions
Variable
Value
auto
Enable authentication on a port.
force-authorized
Force a port to always be in an authorized state.
force-unauthorized
Force a port to always be in an unauthorized state.
no
Removes the port from 802.1x management.
Configuring quiet period
Set the quiet-period time interval. The default is 60 seconds.
When the system cannot authenticate a client, the system remains idle for a
quiet-period interval of time, then tries again. By administratively changing
the quiet-period interval, by entering a lower number than the default, a
faster response time can be provided.
quiet-period interval of time, then tries again. By administratively changing
the quiet-period interval, by entering a lower number than the default, a
faster response time can be provided.
Procedure steps
Step
Action
1
To enter configuration mode, enter:
configure terminal
2
To specify the Ethernet interface to configure, enter:
interface ethernet <slot/port>
3
To specify 802.1x configuration, enter:
dot1x
4
To configure the quiet period, enter:
quiet-period <1-65535>
—End—
Enabling reauthentication
Enable or disable reauthentication on a port.
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.