Nortel 100 Instrução De Instalação
34 Chapter 3 Installing the Instant Internet software
209226-B
3
Click Install Instant Internet.
The Install program samples the traffic on your network to determine how to
configure itself.
configure itself.
4
The next steps vary depending on your individual configuration. Read the
following options to determine your next step:
following options to determine your next step:
•
If the Enter Unit’s IP Address dialog box opens, the Install program has
determined that your network environment is running TCP/IP and you
have assigned static IP addresses for each workstation on the network.
Proceed with step
determined that your network environment is running TCP/IP and you
have assigned static IP addresses for each workstation on the network.
Proceed with step
.
•
If the Enter IP Information for Interface dialog box opens, the Install
program has determined that your network environment is running
TCP/IP, that a DHCP server exists, and that the DHCP server has assigned
an IP address to the Instant Internet unit. Skip to step
program has determined that your network environment is running
TCP/IP, that a DHCP server exists, and that the DHCP server has assigned
an IP address to the Instant Internet unit. Skip to step
Caution:
If the “Install is searching for units. Please wait...” message is
displayed
, the Instant Internet unit did not initialize properly
and the installation will not proceed as described in this manual. DO
NOT continue with the installation.
NOT continue with the installation.
Figure 3 Please wait message
a
Click Cancel Install.
b
Reboot your workstation.
c
Turn the unit off and back on.
d
Wait for LED 2 to glow amber.
e
Begin the installation again.
For additional information, see