Nortel 100 Instrução De Instalação
84
Appendix B Workstation support
209226-B
— Let the workstations know that your existing DHCP server will assign IP
addresses (
) and that it has a new address for them (
).
Installing TCP/IP on a workstation
Depending on your operating system, you may have to install TCP/IP on your IP
workstations if it is not already installed. If you have trouble with the following
procedure, refer to your operating system documentation.
workstations if it is not already installed. If you have trouble with the following
procedure, refer to your operating system documentation.
Installing TCP/IP on a Windows 95 workstation
To install TCP/IP on a Windows 95 workstation:
1
From the Windows Start menu, choose Settings > Control Panel.
2
Double-click the Network icon.
The Network dialog box opens.
3
Click Add.
The Select Network Component Type dialog box opens.
4
Select Protocol and then click Add.
The Select Network Protocol dialog box opens.
5
In the Manufacturers list, select Microsoft.
6
In the Network Protocols list, select TCP/IP.
7
Click OK.
You may be prompted for your Windows Installation CD. Follow any
instructions displayed on the screen.
instructions displayed on the screen.
TCP/IP is added to the list of installed network components. You are now
ready to configure TCP/IP to work with your network.
ready to configure TCP/IP to work with your network.
Note:
Windows 98, Windows NT, and Windows 2000 workstations are
already configured with TCP/IP. They are also already configured to
obtain an IP address automatically (DHCP).
obtain an IP address automatically (DHCP).