Nortel 15000 Guia De Referência
show ip static
92
308689-B Rev 00
The table includes the following information:
show ip static
The
show ip static
command displays all statically configured routes on the
router. The output includes the following information:
-A
Displays the entire routing table; routes marked with an
asterisk (*) are routes in the normal routing table.
asterisk (*) are routes in the normal routing table.
-s
Displays the slot. If the address is 255.255.255.255, then
the cache will be the internal cache for this slot.
the cache will be the internal cache for this slot.
Destination/Mask
Destination IP address for this route and the subnet mask
to be combined with the destination address. This
combination is then compared with the value in
Destination. If the value of Destination is 0.0.0.0 (a
default route), then the value of Mask is also 0.0.0.0.
to be combined with the destination address. This
combination is then compared with the value in
Destination. If the value of Destination is 0.0.0.0 (a
default route), then the value of Mask is also 0.0.0.0.
Proto
Routing method through which the router learned this
route: local, RIP, or OSPF.
route: local, RIP, or OSPF.
Age
Number of seconds since this route was last updated or
verified to be correct. The meaning of “too old” depends
on the routing protocol specified under Proto.
verified to be correct. The meaning of “too old” depends
on the routing protocol specified under Proto.
Cost
Number of hops to reach the destination.
NextHopAddr / AS
IP address of the next hop of this route. If the next hop is
an unnumbered interface, the output includes 0.0.0.
an unnumbered interface, the output includes 0.0.0.
n,
where
n is the number of the circuit on which the interface
has been configured.
AS
Autonomous system identifier for destination IP
interfaces running the OSPF protocol.
interfaces running the OSPF protocol.
IP Destination
IP address of this static route.
Network Mask
Subnet mask for this static route.
Cost
Number of hops to reach the destination.
Next Hop
IP address of the next hop on the route. If the next hop is
an unnumbered interface, the Next Hop field displays the
circuit number associated with the unnumbered interface.
an unnumbered interface, the Next Hop field displays the
circuit number associated with the unnumbered interface.