Optoma hd7100 Manual Do Utilizador
14
Connections
and
Setup
Connecting the Projecto
r to Other Devices
Before Setting Up
Note
• Before connecting, turn off both the projector and the devices to be connected. After making all
connections, turn on the projector first and then the other devices.
When connecting a computer, be sure that the comp
When connecting a computer, be sure that the comp
uter is the last device turned on, after all
connections are made.
• Read the operation manuals of the devices to
be connected before making connections.
This projector can be connected to
Video equipment:
A VCR, Laser disc player or other video equipment.
A DVD player or DTV* decoder.
A DVD player or DTV* decoder.
*DTV is the umbrella term used to describe the new digital television system.
A computer, using:
A HD 15-pin VGA to HD 15-pin VGA cable (sold separately), or
A DVI-D to DVI-D cable (sold separately), or
An RS-232C cable.
A DVI-D to DVI-D cable (sold separately), or
An RS-232C cable.
Connecting the Power Cord
Plug the supplied power cord into the AC
socket on the rear of the projector.
socket on the rear of the projector.
Supplied
accessory
accessory
Power cord
S-VIDE
O
VIDEO
Pr/Cr
Pb/Cb
Y
Pr/Cr
Pb/Cb
Y
PC
DVI
WARNING
v Do not disas
semble any
components
excep
t the
lamp
chassis
cove
r while replacing
the lam
p.
v Do not touch
ventilation
slots,
lamp
and objects next t
o them
until
they
have
sufficiently cooled
down
.
v Never inser
t any
objec
ts through vent
ilation
holes
.
v Do
not use
this unit ne
ar water
or in
a rainy/moist
environment
.
v Keep
at least 0.3
foot
(10 cm)
of space
between
ventilation
slots and
nearest o
bject
or wall.
Made in
Taiwa
n
RS-232