CSSN 1000 Manual Suplementar

©

•  Click 'Add' and type in a name for the field. 
•  Repeat the process to create additional fields. 
•  Click OK. You will find new fields in the Custom fields' window. You can 

now type values or data into the field. 

Repeat the process above. After the 'Add' window opens, select a label and click 'Edit' 
to change the field's name, or 'Remove' to remove it. When you are done, click OK. 

Text data saving options are controlled from the configuration panel's Automation tab. 
See Automation tab, page 56. 

 

 

Use this option to check if the card you are scanning is genuine. IdScan will scan the 
data on the card using OCR, and then compare it to data from a second source on the 
card, either the barcode or the magnetic strip (if available). If the data from the two 
sources match, the card is genuine. Else, the card is either faked, or one of the data 
sources on the card is corrupted.  

1.  Select Record -> New Record from the menu bar or click on the New Record 

button from tool bar. 

2.  The New Record Screen will appear. 

3.  Select a state from the State dropdown list or use the State Detect option (for 

OCR). You are advised to select the state manually, because if the state is not 
recognized for some reason, you’ll have to repeat the process. You can also 
select a state from the quick state selection buttons, if you have predefined 
them. (To set a button for the desired state, right-click on the button. Select the 
desired state from the list. After you release the mouse button, you’ll notice 
that the button name has been changed to the state you selected).  

4.  Use the popup menu of the card verification button to 

select a second card data source, which will be used for 
comparison with the OCR results. (Barcode by default. 
The magnetic Reader will only be available if a 
Magnetic reader is connected to the computer).