Extreme 3802 Manual Do Equipamento
Removing MSM64i Modules
Extreme Networks Consolidated Hardware Guide
233
3
Simultaneously rotate the ejector/injector levers outward to disengage the module from the
backplane.
backplane.
a
Grasp the module front panel with one hand, and place your other hand under the metal panel to
support the weight of the module.
support the weight of the module.
CAUTION
To prevent ESD damage, handle the module by the metal panel edges only. Never touch the
components on the PCB or pins on any of the connectors.
components on the PCB or pins on any of the connectors.
b
Slide the module out of the chassis and place it immediately into an antistatic sack to protect it
from ESD damage and to prevent dust from collecting on the module’s connectors.
from ESD damage and to prevent dust from collecting on the module’s connectors.
4
If you are going to install a replacement MSM64i, follow the MSM64i module installation procedure
on page 229.
on page 229.
5
Leave the ESD strap permanently connected to the chassis so that it is always available when you
need to handle ESD-sensitive components.
need to handle ESD-sensitive components.
To remove additional MSM64i modules, repeat steps 1 through 4.