Intermec 9710 Guia De Referência

C d 39

This section covers the HP 2392A workstation. The individual Wedge Interface Guide 
corresponding to this section is part number 056076. 

Connecting the reader to the HP 2392A workstation requires one cable. The interface kit 
contains the keyboard/terminal cable. If you need to order a replacement cable, use the 
part numbers listed below: 

•  Wedge interface kit (P/N 056075) 
•  Keyboard/Terminal cable (P/N 056074) 

The reader does not require an external power supply to work with the workstation. 
Even though the reader does not require a power supply, set the PCB jumper to connect 
pins 2 and 3 on the reader’s rear panel. This is an exception for the HP 2392A. 

There are two HP2392A terminals that look identical, but require different configuration 
IDs. To distinguish between the two versions, you need to find the firmware part 
number that can be displayed using the ROM display option on the workstation.