Intermec 1470 Guia Do Utilizador
1470/1471 Imager User’s Manual
3-72
Require Output Sequence
When an output sequence is Required, all output data must conform to an edited
sequence or the imager will not transmit the output data to the host device. When it’s
On/Not Required, the imager will attempt to get the output data to conform to an edited
sequence, but if it cannot, the imager transmits all output data to the host device as is.
sequence or the imager will not transmit the output data to the host device. When it’s
On/Not Required, the imager will attempt to get the output data to conform to an edited
sequence, but if it cannot, the imager transmits all output data to the host device as is.
When the output sequence is Off, the bar code data is output to the host as the imager
decodes it.
decodes it.
Note:
This selection is unavailable when the Multiple Bar Codes Selection is turned on.
Required
On/Not Required
*
Off
Require Output Sequence cannot be set in Visual Menu.
Output Sequence Editor
In the Output Sequence tab of Visual Menu, enter the digits for the output sequence
followed by
followed by
ff
in the Sequence field and then click the Write Settings to Device button
(
).