Citel 3000 Guia Do Utilizador
Page 16
EXTender 3000 System Administrator’s Guide (Definity)
Office Module Specifications
5.
Connect the AC adapter to an electrical outlet. Use only the AC adapters provided with the Extender. U
interface requires a 120v AC adapter, an S/T interface requires a 220/240v AC adapter.
interface requires a 120v AC adapter, an S/T interface requires a 220/240v AC adapter.
6.
The Office Module starts powering up. After a long series of flashing LED sequences, the Office Mod-
ule LED will blink a repeating series of yellow, green, *green, red. This LED sequence confirms that the
Office Module is installed correctly.
ule LED will blink a repeating series of yellow, green, *green, red. This LED sequence confirms that the
Office Module is installed correctly.
*Note: For an S/T Interface, the third blink may not be green.
7.
If applicable, administer the ISDN BRI and station ports as required.
•
If the Office Module is connected to an ISDN BRI port on your PBX you should administer your
incoming PRI to route data calls that are destined for the Office Module.
•
Administer the station port as you would any other digital port station.