Citel 6000 Guia Do Utilizador
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
107
IP Connection (RVP_Over_IP) – Remote Only
The EXTender 6000 and the EXTender 4000 Remote units utilize an IP connection to provide
remote user connectivity. This means that the Ethernet port on the back of the unit is plugged
directly into the existing network through an RJ-45 connector.
The PBXgateway IP address must be entered within the Management Interface (MI) of the
Remote unit to locate the PBXgateway within the IP network.
remote user connectivity. This means that the Ethernet port on the back of the unit is plugged
directly into the existing network through an RJ-45 connector.
The PBXgateway IP address must be entered within the Management Interface (MI) of the
Remote unit to locate the PBXgateway within the IP network.
Procedure
1. For the EXTender 4000 Remote unit, access the Connect Menu from the Main Menu using the
following path:
Path: Remote->Configuration->Connect
The following menu appears:
The following menu appears:
Figure 65: Connect Type
3. Press the
→ key to access the IP Destination parameter.
4. Enter the IP address of the PBXgateway.
Note: This address must be assigned by the network administrator.
5. Press the
← key to accept changes and go back to the Configuration Menu.
6. Press the
↓ key to the Save option. Press Enter.
7. For the EXTender 6000 Branch unit access the Connect Menu from the Main Menu using
the following path: