Citel 6000 Guia Do Utilizador
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
87
Resetting Ports (Gateway and EXTender)
There may be times when a port, or all the ports have to be reset on the EXTender 6000.
Resetting ports may cause damage to the older phones as the voltage parameters for older
versus new phones differ.
Remote Only: To reset port on a remote that has a variety of older and newer models, unplug
all phones. Not doing this will result in damage to the phones. Note: This applies to the
Remote unit only.
Resetting ports may cause damage to the older phones as the voltage parameters for older
versus new phones differ.
Remote Only: To reset port on a remote that has a variety of older and newer models, unplug
all phones. Not doing this will result in damage to the phones. Note: This applies to the
Remote unit only.
Procedure
1. Login into the Extender or Gateway.
Path:
→Utilities→Diagnostics→Reset Port
Figure 39: Diagnostic Menu
2. Press
→ and enter an individual port number or type in ‘all’.
Figure 40: Reset Port
3. Press Enter. A warning appears telling you that “All connections on all ports will be lost” or if
you selected a single port to reset “All connections on Port_x will be lost”.
Figure 41: Reset Port - Warning
4. Enter Y if you are prepared to lose connections on all ports. It is best to perform this task
during business down hours.