Citel 1100 Guia Do Utilizador

 Guide 

Usage 

Used for managing multiple sites. The same 
configuration file can be transferred to different 
units if the programming is consistent between 
devices. 

Dependencies 

Must use the correct file type (i.e. runtime.cfg) 

Path Gateway 

(Remote) 

->Utilities->Diagnostics 

Gateway (Remote) ->Utilities->Diagnostics 

Description 

This will initialize the internal modem. 

Usage 

Should be executed if experiencing modem 
problems. 

Dependencies none 

Path Gateway 

(Remote) ->Utilities->System 

Gateway (Remote) ->Utilities->System 

Description 

Allows the administrator to log in to another unit 
via the IP address. 

Usage 

Used for remote configuration of the Switch or 
Remote Module. 

Dependencies 

Valid IP address must be configured and Telnet 
must be enabled. 

Path 

Gateway (Remote) ->Utilities->File 
Gateway (Remote) ->Utilities->Upgrade 

Description 

This will “clean up” the internal flash file system 
for improved performance.  

Usage 

Should be executed prior to performing a 
software upgrade or for advanced trouble 
shooting. 
WARNING:

 Do not execute on an active system. 

This may cause the flash file system to become 
corrupt rendering the Switch Module or Remote 
Module inoperable. 

Dependencies none 

Path 

Gateway (Remote) ->Configuration->Log 

Description 

Allows for the selection of what log types will be 
displayed first in the log file. 

Usage 

Used during trouble shooting. The log message 
priority can be customized for the level of 
troubleshooting desired. 
Log message priorities include: 
Fatal:        Unit is not functioning 
Error:        Failure 
Warning:   Problem with unit but still operational 
Info:          Remote session, someone connected 
Debug:     Detailed message 
Trace:      Packet type tracing 
For example, if the log priority is set to Info, then