IBM 1650 Guia Do Utilizador
127
b
Close the document cover.
c
Place a blank piece of dark colored paper (A4 or Letter) in the ADF, and adjust the guides.
Make sure the paper guides are snug against the paper; do not bend the paper.
9
Press Start.
The registration process scans the pages in the scanner glass (flatbed) and ADF, and then
display a success or failure message.
display a success or failure message.
If a failure message appears, do another scanner registration, realign the paper, and verify
each step as it is performed. If a second failure message appears, contact an authorized
service representative.
each step as it is performed. If a second failure message appears, contact an authorized
service representative.
10
Touch Exit Configuration Menu.
The printer will reboot and return to the home page.
Moving the MFP
Follow these guidelines to move the MFP within the office or to prepare the MFP for shipment.
•
Always use at least three people to lift the MFP.
•
Always turn off the MFP using the power switch.
•
Disconnect all cords and cables from the MFP before attempting to move the MFP.
•
Failure to repackage the MFP properly for shipment can result in damage to the MFP not
covered by the MFP warranty.
covered by the MFP warranty.
•
Damage to the MFP caused by improper moving is not covered by the MFP warranty.
Moving the MFP within the office
The MFP can be safely moved from one location within an office to another following these
precautions:
precautions:
•
The MFP must remain in an upright position.
•
Any cart used to move the MFP should have a surface able to support the full footprint of the
MFP.
MFP.
•
Severe jarring movements may cause damage to the MFP and must be avoided.
CAUTION:
Follow these guidelines to avoid injuring yourself or damaging
the MFP.
the MFP.