IBM 570 Guia Do Utilizador
The computer uses battery power to enter hibernation mode.
Therefore, it reserves some battery power if it is set to enter
hibernation mode when a low-battery condition occurs. This can
cause the battery operating time to be shorter than the time
publicly stated.
hibernation mode when a low-battery condition occurs. This can
cause the battery operating time to be shorter than the time
publicly stated.
Do not add or remove memory during hibernation mode. If you
do, the computer resumes from hibernation mode without
recognizing the changed memory size. To ensure that the
computer recognizes the correct memory size, shut down; then
restart your operating system.
recognizing the changed memory size. To ensure that the
computer recognizes the correct memory size, shut down; then
restart your operating system.
If the computer is powered with battery power, it turns power off
to the PC Card when entering hibernation mode. When normal
operation resumes, if the PC Card or computer does not operate,
restart the application or computer.
operation resumes, if the PC Card or computer does not operate,
restart the application or computer.
If you are using some communication cards and your computer
is powered with ac power, the computer does not enter
hibernation mode. This prevents possible problems from
occurring with communication application programs after the
computer returns to normal operation.
hibernation mode. This prevents possible problems from
occurring with communication application programs after the
computer returns to normal operation.
Note:
If the communication links are still not reestablished,
remove and then reinstall the PC Card before restarting
the system or application program.
remove and then reinstall the PC Card before restarting
the system or application program.
Notes for reinstalling or installing the operating system
Install your operating system with Advanced Power Management
(APM), and install the ThinkPad Configuration program with the
Utility Diskette to use power management mode.
(APM), and install the ThinkPad Configuration program with the
Utility Diskette to use power management mode.
Note:
To install the software
Installing a new operating system
and its device drivers.
If you are using Windows 98 or Windows 95, APM is
automatically installed in your computer.
automatically installed in your computer.
If you are using DOS, APM is automatically installed in your
computer. To verify that the computer has installed APM correctly,
type
computer. To verify that the computer has installed APM correctly,
type
POwer
at the command prompt and press Enter. If a screen
similar to the following appears, APM is successfully installed.
42
IBM ThinkPad 570 Online Book